| Author |
Message |
aircool
Registered Member
Joined: 09 May 2005
Posts: 34
Location: UK
|
 Posted: Wed Nov 01, 2006 9:38 pm Post subject: Vectra 2.0 dti P1335 inj pump rpm signal missing |
 |
|
This vehicle came in with EML on, i could not read engine ecu until i removed non genuine radio,(it was shorting out K line!) cleared codes and ran engine, drive off, after a few yards eml comes on, P0725 and P1335 are present, i get no engine rpm signal at instrument panel, but engine ECU has RPM reading, i am going to get involved tomorrow, any ideas?
This may be temperature related, i am sure RPM signal was at instrument cluster when it was cold.
Thanks for any help
_________________
if it is'nt broke, dont fix it! |
|
| Back to top |
|
 |
mayfairgearbox2
Registered Member
Joined: 26 Sep 2006
Posts: 21
Location: south africa
|
| Posted: Thu Nov 02, 2006 8:38 am Post subject: |
|
|
P0725 Engine Speed input Circuit Malfunction
P1335 Crankshaft Position Sensor Circuit Malfunction (***(May not be applicable for Honda / Acura)***)
HOPE THIS HELPS
FRITZ |
|
| Back to top |
|
|
neculai
New Member
Joined: 21 Oct 2006
Posts: 10
|
| Posted: Thu Nov 02, 2006 10:24 am Post subject: Re: Vectra 2.0 dti P1335 inj pump rpm signal missing |
|
|
| ckp sensor brocken |
|
| Back to top |
|
|
aircool
Registered Member
Joined: 09 May 2005
Posts: 34
Location: UK
|
| Posted: Thu Nov 02, 2006 5:23 pm Post subject: Thanks for your help |
|
|
It was crank sensor, i had ruled it out at first beacause engine was still running, but this is a mechanical diesel pump, it starts even without good signal.
now the MAF has been changed, due to code P1125, but turbo does not work, does anyone know how it is controlled?
This car is a nightmare!!!
Steve
_________________
if it is'nt broke, dont fix it! |
|
| Back to top |
|
|
|
