OBDI Opel GSI

swing · Posted: Tue May 13, 2008 1:11 pm Post subject: OBDI Opel GSI

Hi Guys

I have a 1990 Opel Kadett 2.0L 16V GSi (possibly the Vauxhall Astra GTe 16v in the UK) that runs the Bosch Motronic 2.5 system. It's been utterly hopeless trying to find a cable with the diagnostic software for this OBD I system. It has a normal nine pin serial cable connector inside the ECU. Could anybody tell me where I should look for?

Thanks guys...

markt · Posted: Thu May 15, 2008 10:11 pm Post subject:

hi
never known of connector inside ecu Confused

should be a 10 pin socket or more commonly known as ALDL socket,usually around turret area on these under bonnet,but,launch cant do them unfortunately,too old.

markt · Posted: Thu May 15, 2008 10:15 pm Post subject:

oops

dont know where that second post came from Very Happy

swing · Posted: Wed May 21, 2008 8:37 am Post subject:

hi,
The ECU is from Bosch motor sport (map able type) I have the software but any links for the cable? Confused

Thanks.

markt · Posted: Wed May 28, 2008 9:29 pm Post subject:

try to contact supplier of ecu or ring a remap specialist to see if they can help with lead Sad

worth a look on ebay also

mike10kfs · New Member Joined: 02 Sep 2007 Posts: 4

you will have to use the universal connector supplied by launch Rolling Eyes

not sure which goes to which but use a good meter and you should be able to work it out.

hope this helps mike

markt · Posted: Sun Aug 10, 2008 12:24 am Post subject:

sorry but launch still wont do it if its been remapped by a third party,thats why they supply the software seperate,ring supplier to find a diagram for the k-line data pin on connector.

	Launch Tech Online Forum Index :: Fault Codes & Tips	All times are GMT
Page 1 of 1