ML 320 PO1570

swing · Posted: Wed Jan 30, 2008 7:23 am Post subject: ML 320 PO1570

Hello guys,
I have got a fault code PO1570 on Mercedes Benz ML320
Chassis - 4JGAB54E5WA019384.

I used the procedures to re code the AAM But not responding I bought new key and tried it still the same, any one had such experience?

Thanks

swing · Posted: Sat Mar 01, 2008 9:46 am Post subject:

Hi,
The problem was the transponder key. It can't be married with the X431.we fixed it with MVP key programming tool. MVP price is cheaper than Ad100 & I suggest having one in the workshop.

Thanks

llaverosv · New Member Joined: 03 Mar 2008 Posts: 3

Hello, Im trying to program a new key for a ML 320, but the code P01570 is always shown, I own the MPV and the T-Code, how can I use any of this programmers to program the new key ??

thanks

swing

haha, are you testing me ? If you have MVP & T- code then you probable have Pin code reader software & the transponder ID reader. In that case it would be easier.

But if you don?t have the pin reader & if it?s for real use this link to get the pin code: http://pin-code.net/index_en.html

If you don?t want the Immo system you also can get rid of it, have you heard about IMMO COMPILER TOOL & IMMO KILLER?

Cheers,

llaverosv · New Member Joined: 03 Mar 2008 Posts: 3

HELLO
maybe I made a mistake with my repply .

my problem is that I am tryieng to program a new key for a ML320 mercedes, I am using the Mercedes Key Prog V1.1 Avtodiag soft,but for the ML320 there is an special instruction I followed that, but always the key doesnt start the vehicle, it seems that I am missing somenthing.

thanks

swing · Posted: Tue Mar 04, 2008 5:15 pm Post subject:

Hi,

It might be hard to do it if it?s been programmed more than the limit. 1998- 2000 they say the limit is only 8- key but for the above they made it 24. By the way, is it the metal key? And which year is it? Do you have the AAM part no? I know some one who's good at it, do you need the link?

Thanks

llaverosv · New Member Joined: 03 Mar 2008 Posts: 3

the dumpfile shows only N 5 , 6 key programmed,

Load sucsesful
0000: FF 4E E0 2D 28 94 00 00 00 00 26 14 99 FF FF FF
0010: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0020: 19 B9 03 01 01 11 FF FF 58 10 60 FF 06 31 FF FF
0030: FF 02 1C 36 25 3E 1D 18 1E 90 11 38 FF FF FF FF
0040: FF FF FF FF FF FF 08 17 0E 0F 10 FF 02 FF FF FF
0050: FF FF FF FF FF FF FF FF FF FF 08 04 04 01 07 05
0060: 03 05 01 0B 02 03 FF FF FF FF FF FF FF FF FF FF
0070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00B0: FF FF FF FF FF FF FF FF FF FF FF 03 06 01 00 02
00C0: FF FF FF FF FF FF FF FF 97 55 B2 B8 4C 01 7F A6
00D0: 3A 7C 1F 05 A3 0E 34 FC FF FF FF FF FF FF FF FF
00E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
That EEprom with taken mask
has used keys N 5,6

as I mentioned I read tne mcu (mc68hc705x32)and then with the software tried to program the new key.For the ML type there is an special procedure.

I would like to have the link you mentioned.
the mercedes blackbox is :
163 545
SW9734

thanks for your time

llaverosv

	Launch Tech Online Forum Index :: Fault Codes & Tips	All times are GMT
Page 1 of 1