swing
Contributing Member
Joined: 15 Mar 2006
Posts: 119
Location: ADDIS
|
 Posted: Sat Mar 01, 2008 9:31 am Post subject: TIPS FOR TOYOTA 1998-2003 MANUAL KEY PROGRAMMING !!!!!1 |
 |
|
Hello all,
I thought that this might be a great help for some.
TOYOTA MANUAL KEY PROGRAMMING
Program an additional key into the AVENSIS 1998 - 06/2000 by following this sequence:
Open driver's door and insert programmed black key into ignition. Close door.
1). within 15 seconds
Switch ignition on and off 4 times.
Switch ignition on.
Open and close the driver's door.
2). Within 20 seconds
Open and close driver's door 5 times.
Remove key from ignition.
3). within 10 seconds
Insert black key to be programmed into ignition.
Switch on and leave for 1 minute.
Remove key.
Repeat step 3 for further keys.
To exit programming open and close the driver's door.
If your key is grey in color then it can?t be used to program additional keys.
Add Duplicate Key, For 1998+ Toyota, Lexus
1. Simultaneously depress and release brake and accelerator pedals 1 time.
2. Insert existing master key into ignition.
3. Within 15 seconds depress and release accelerator pedal 5 times.
4. Within 20 seconds depress and release the brake pedal 6 times and
remove key.
5. Within 10 seconds insert new key into ignition.
6. Within 10 seconds depress and release the accelerator pedal 1 time.
7. After 80 seconds new key is registered and security light goes off.
8. Remove new key and depress and release brake pedal 1 time.
Add Duplicate Key, For 2002+ Toyota, Lexus
Requires one working Toyota/Lexus Master Key.
1. Make sure all doors and windows are closed.
2. Insert Master key into the ignition cylinder.
3. Cycle the ignition cylinder from On to OFF five times.
4. Open and close the driver side? Door 6 times.
5. Remove the Master Key and insert the new duplicates key.
6. TURN THE IGNITION CYLINDER ON. |
|
