Arun Sivanand
Support Team
Joined: 20 Apr 2005
Posts: 350
Location: Dubai, UAE
|
 Posted: Mon Jul 02, 2007 8:38 am Post subject: |
 |
|
Dear Ton 1,
Please check the following section as regards the malfunction mentioned here in:
1. Fuel Temperature Sensor (ECM Harness pin: 13& 35, 20 deg temperature= 2400-2600 ohms and 40 deg temp = 1100-1200 Ohm)
2. Fuel Quantity Adjuster Position Sensor (ECM Harness pin: 14&21, 14& 39 shall give ~ 7 Ohms)
3. Fuel Quantity Adjuster (ECM Harness pin: 1&17 = 2 Ohms)
4. Fuel Inj. Timing solenoid (ECM Harness pin: 10& 17 = 10-20 Volts)
5. Fuel Shut off Solenoid (ECM Harness pin:3 & earth = 6-10 Ohms)
Regards,
Arun
_________________
Should you need any assitance in Operation and Use of the X431 Please feel free to clarify them with us as per convenience |
|
