Mercedes ml 320 gasoline vin 4jgab54e1wa032066 no crank

dembele

Abs lt on i/c panel if ign sw on start no crank
X-431 dtc gives Eng F but message error +ig sw is it on +dtc socket is it connected
Abs/esp F with code c1200 brake lt sw s9/1 fault

and code b1703-2 relevant tech manual current/stored
Is there someone who masterize this situation
Thank for all
Dembele :?

Arun Sivanand · Posted: Sat Oct 06, 2007 8:57 am Post subject:

Dear Dembele,

Please check the brake light switch.

Or,

Depress the brake switch completely and hold it, then ON the Ignition switch and hold for few seconds, check the ABS light.

If still persist, please check the brake switch for maintenance or replacement.

As regards the difficulty in reading the fault codes, please try a different version of the software,

If still fails, then please arrange to affect the short test and in the end of the test result you shall get option of Clear Fault codes, please try clkearing from there. This shall take some more time than usual, but please be patient to review the results,

Regards,
Arun
_________________
Should you need any assitance in Operation and Use of the X431 Please feel free to clarify them with us as per convenience

dembele · Posted: Wed Oct 17, 2007 9:37 am Post subject:

Thank you Mr Arun ,
After replacing the stop lamp sw & clearing codes this is running very good
best regards
mr Dembele :D

	Launch Tech Online Forum Index :: Fault Codes & Tips	All times are GMT
Page 1 of 1