| Author |
Message |
Jaro
New Member
Joined: 02 Jun 2006
Posts: 1
Location: Forssa Finland
|
 Posted: Fri Jun 02, 2006 9:16 am Post subject: BMW 46 sport 2000 |
 |
|
I try reset oilservice diagnostic but it does not works. i try many times but oil service not resetting why?
_________________
Autogear - Automatic transmission specialist |
|
| Back to top |
|
 |
kawika
Contributing Member
Joined: 18 Sep 2004
Posts: 141
Location: Honolulu, Hawaii USA
|
| Posted: Fri Jun 02, 2006 5:04 pm Post subject: |
|
|
Go into instrument module, try "manual reset"
When in the automatic mode, does not always reset the lamps.
Dave |
|
| Back to top |
|
|
sunday
New Member
Joined: 24 Jun 2006
Posts: 2
Location: KENYA
|
| Posted: Sat Jun 24, 2006 10:16 am Post subject: BMW 46 2000 service reset |
|
|
Hi and thanks for trying many methods to get the reset of the service interval indication.
If all else does not work please try using the instrument cluster left side knob you know the one that you can also use to change the temperature display from F to C.
With ignition off press this knob and keep it pressed.
Then turn the key to the radio position and keep pressing the knob until the display 'reset' appears on the display.
Release the knob and press it again until the 'reset' starts to blink.
Release the knob again and press again until it says 'end' then release the knob.
Please let me know what happens.If no success on attempt number 1 try again.
There is a built-in feature in these clusters to help you reset the service display even in the absence of a tester unless the parameters for the particular service carried out have not been met eg mileage difference not enough etc |
|
| Back to top |
|
|
|
